Receiver Considerations - Extron electronics MTP SW6 User Manual

Receiver Considerations

•
The receivers' buffered outputs do not provide pre-peaking control. The total
recommended distance for an entire daisy chain is the same as for a single
transmitter and receiver. The transmitter's Pre-Peak switch has the same affect on the
recommended transmission distance for a daisy chain as for a single transmitter and
receiver.
•
See the recommended transmission ranges in
table apply equally for the switcher and one receiver and for a transmission daisy
chain. For example, the maximum suggested range for high quality transmission of
1024 x 768 video is 600 feet between either the switcher and one receiver or the
switcher and three daisy-chained receivers.
•
For daisy-chained units, the irst receiver in the chain must be at least 100 feet from
the switcher when the Pre-Peak switch is on.
•
For daisy-chained units, any receiver in the chain closer than 350 feet may experience
some form of over-peaking when the Pre-Peak switch is on.
• If a receiver is the last receiver in a daisy chain, its end unit DIP switch setting needs
to be changed. Refer to the MTP 15HD RS Series User's Manual that applies to your
receiver or details.
1. The recommendations in the
Table
MTP SW6 • Installation and Operation 14