Input Supervision - Bosch Plena Software Manual

Plena Voice Alarm System | Software Manual | Supervision
5. 1 2

Input supervision

Use the Enable box in the Input Supervision block to
enable and disable input supervision. By default, this
box does not contain a checkmark, which means that
input supervision is disabled. Input supervision can be
configured for:
• Each emergency trigger input in the system
• The mic/line input of the voice alarm controller
Proceed as follows:
1 Click the Setup button in the Input Supervision block
in the Supervision window. A window similar to the
one in figure 5.3 appears.
figure 5.3: Input supervision
2 Select the unit to which the inputs are connected
from the Unit drop-down list (for example,
Controller).
3 Put a checkmark in the boxes of the emergency
trigger inputs which must be supervised. Leave the
boxes of the emergency trigger inputs for which
supervision must be disabled empty.
• The Select All button makes it possible to enable
supervision of all emergency trigger inputs that
are connected to the selected unit.
• The Clear All button makes it possible to disable
supervision of all emergency trigger input that
are connected to the selected unit.
Note
IRefer to 5.3. 1 3.2 of the IUI manual.
Bosch Security Systems | 2005-10 | 9922 141 10384 en
en | 21