Table of Contents
Advertisement
Note
Cable duct to be used during the installation phase. It allows the electrical cables separation
81
from the optical cables.
82
Must be used in conjunction with "STM–1 MULTIMODE OPT SC/PC" Optical Module
83
Every kit contains #1 connectors for 7x2 Mbit/s interface 120 Ohm
84
To be used for the 2 Mbit/s connections and for the synchronism on SERVICES I/F card.
85
To be used for the 34/45 Mbit/s and STM–1 electrical connections
86
To be used only with SERVICES I/F port card. It allows the 75/120 Ohm conversion.
87
To be used with the relevant cable in the installation phase for ethernet port connection
88
To be used to remove the fiber cable from port connector
89
Details concerning the software P/N are given in the Operator's Handbook.
The subrack (with relevant fans units and filter) must be install in the Rack together with the
90
1660SM SUBRACK "SR60M"
91
Can be used as alternative to the "Dust filter for fan shelf 19"; It doesn't require maintenance.
ED
02
Explanation
3AL 91669 AA AA
674
(End of table)
108
/
674
Advertisement
Table of Contents
