Preserve Battery Life; The Battery Charger - Fluke 753 User Manual

Preserve Battery Life

An optional Auto Battery Save feature turns the Product off
after a selected set idle time. The default setting for Auto
Battery Save is Off. The setting is kept after the Product
power is off. Auto Battery Save operates the same when the
battery charger is used.
To turn on the Auto Battery Save feature:
1. Push s.
2. Push  to highlight Off that follows Auto Battery
Save.
3. Push  or the Choices softkey.
4. Push to  highlight On, then push .
5. To use the timeout period shown on the display, stop
here. Push the Done softkey to exit Setup mode and do
not go on to step 6.
6. If you wish to change the timeout period, push  to
select the timeout period following Battery Save
Timeout.
7. Push  or the Choices softkey.
8. Record choice of timeout period in minutes (accepted
range: 1 to 120 minutes).
9. Push the Done softkey.
Find Quality Products Online at:
10. Push the Done softkey or s to exit Setup mode.

The Battery Charger

To avoid damage to the Product, use only the
Battery that comes with the Product, Fluke
model BP7240, part number 4022220.
Where ac power is available, the battery charger can be
used to conserve battery power and energize the Product.
When the battery is in the Product, the battery charges only
when the Product is off. When you calibrate an instrument,
best results come from battery power use.
An optional 12-V car adapter is available that can be used
to charge the battery outside of the Product. See
"Accessories".
GlobalTestSupply
www.
Documenting Process Calibrator
The Battery
Caution
.com sales@GlobalTestSupply.com
25