Display - Fluke 753 User Manual

753/754
Users Manual

Display

Figure 6 and Table 5 show a typical display. The display
shown is MEASURE mode. Near the top of the display is
"Source Off." This display area shows what is happening in
the other mode (SOURCE or MEASURE). The other parts
of the display are:
•
Status Bar: Shows the time and date, and the status of
Loop Power, Auto Battery Save, and Backlight Timeout;
all of which are set in Setup mode. The selected HART
channel (if HART is active-754 only) and low-battery
and backlight-on symbols are also show here.
• Mode Indicator: Shows if the Product is in MEASURE
or SOURCE mode. In split screen
MEASURE/SOURCE mode, there is a Mode Indicator
for each window.
18
Find Quality Products Online at:
•
Measured Value: Shows the measured value in a
selection of engineering units or percent of scale.
• Range Status: Shows if Auto Range is on, and what
range is currently in operation.
• Custom Units Indicator: Shows that the displayed
units are custom. The initial engineering units of the
measure or source function are not shown.
•
Secondary Value: Shows the measure or source value
in initial engineering units when scaling or custom units
are on.
GlobalTestSupply
www. .com sales@GlobalTestSupply.com