GeoVision VS04H Quick Start Manual page 25

GV-VS2420 / 2400
1. Press and then release the Reset button immediately.
2. Press and hold the Default button until the Ready LED blinks. This
may take up to 30 seconds. The Ready LED will blink twice.
3. Release the Default button. The process of loading default values is
complete, and the GV-Video Server starts rebooting itself with the
Ready LED turning off.
4. Wait until the Ready LED turns on again. After this all the settings are
returned to default values
Note: Before the Ready LED is on again, do not unplug the power
cable; otherwise the loading of default values will fail.
4
5