GeoVision VS04H Quick Start Manual page 14

5. Optionally connect the DC Male-to-Male Cable to power on the camera
through the GV-Video Server.
6. Wait until both Power and Ready LEDs are on and then you can
access its Web interface. See 4. Accessing the Camera later in the
Quick Start Guide.
Note:
1. The GV-VS11 / 14 and GV-VS2420 / 2400 do not support PoE function.
2. The DC Male-to-Male Cable and 3.5 mm Stereo to RCA Cable are only
supplied for GV-VS04H and GV-VS14. Optionally purchase these
accessories for GV-VS2420 / 2400.
3. The GV-Video Server cannot work with the microphone requiring power
from the unit. Use the microphone that has external power supply.
4. When PoE is applied, you cannot power on the camera through the
GV-Video Server.