I/I Isolator/Transmitter - Omega CL3001 User Manual

3. Select voltage input on the isolated display as described in
section 5.1.
4. Connect the trip as shown in figure 28.
5. Test and calibrate the trip per the manufacturer's instructions.
7.10

I/I Isolator/Transmitter

Figure 29 - I/I Isolator/Transmitter Application
1. Disconnect any test leads from external devices.
2. Select current output on the primary display as described in
section 4.2.
3. Select current input on the isolated display as described in
section 5.2. Select the isolated loop power option.
4. Connect the transmitter as shown in figure 29.
5. Test and calibrate the transmitter per the manufacturer's
instructions.
39