Avaya E129 Administering page 70

Administering through the configuration file
Parameter Default value
P1493 0
P1328 60
P65 0
P129 0
P90 0
P298 0
P135 0
P2304 0
P85 4
June 2016
Description
Specifies the ring tone that the deskphone plays when an incoming caller
ID matches the second matching rule. Assign any of the following values:
• 0: System ring tone
• 1: Custom ring tone 1
• 2: Custom ring tone 2
• 3: Custom ring tone 3
Specifies the timeout in seconds for rings on no answer. You can specify
any value in the range of 30 to 3600.
Specifies whether the From header in the outgoing INVITE messages is
set to anonymous. Assign any of the following values:
• 0: No
• 1: Yes. The deskphone blocks the caller ID.
Specifies whether the phone rejects the anonymous calls. Assign any of
the following values:
• 0: No
• 1: Yes
Specifies whether the phone automatically turns on the speaker phone to
answer incoming calls after a short reminding beep. Assign any of the
following values:
• 0: No
• 1: Yes
Specifies whether the phone automatically turns on the speaker phone to
answer incoming calls after a short reminding beep based on the SIP Call-
Info header that the server sends. Assign any of the following values:
• 0: No
• 1: Yes
Specifies whether the Refer-To header uses the Contact header
information of the transferred target for attended transfer. Assign any of the
following values:
• 0: No
• 1: Yes
Specifies whether the phone transfers the call to another party if the
conference initiator hangs up. Assign any of the following values:
• 0: No
• 1: Yes
Specifies the timeout in seconds when the phone dials the digits if no key
is pressed after the timeout. Specify any value in the range of 1 to 15.
Administering Avaya E129 SIP Deskphone
Comments on this document? infodev@avaya.com
Table continues...
70