E-Mail Check Error; Battery Error; Others - Toshiba GD-1040 Service Manual

1.7 E-mail Check Error

Display
NOT POP3 RECV.
MODE
POP3 SRV. NOT EXIST
IP ADDRESS NOT
EXIST
E-MAIL NOT EXIST
BAD POP3 LOGIN
NAME
POP3 SRV NOT
CONNECT

1.8 Battery Error

Display
LOW BATTERY
BATTERY ERROR

1.9 Others

Display
INTERNET FAX
SENDING
PRINTING...
MIB ACCESSING
FTP ACCESSING
Internet Fax Kit - Troubleshooting
Cause
This error message is displayed by
pressing the [Check E-mail] key while
the Receive Mode is set as SMTP.
The machine cannot find the POP
server in the Network when checking
the E-mail.
The IP address is not assigned.
No E-mail has been received.
The your user name is locked to log in
the POP server or the password is
incorrect.
The machine cannot connect to the
POP server.
Cause
The power of the battery of the
Internet Fax unit is low.
The battery is not connected to the
Internet Fax unit correctly or the
battery is out of order.
Cause
This message is displayed by press-
ing any button on the Operation Panel
while the machine is sending the E-
mail.
This message is displayed by press-
ing any button on the Operation Panel
while the machine is printing the
received E-mail.
This message is displayed by press-
ing any button on the Operation Panel
while the machine is analyzing the
MIB
This message is displayed by press-
ing any button on the Operation Panel
while the machine is transmitting the
data in the FTP.
Select POP for Receive Mode setting
if your Incoming E-mail server is the
POP server. If the Receive Mode is
set to SMTP, the [Check E-mail] key
is not available.
Make sure that the mail server is
properly running on the network.
Assign the IP address.
Confirm the POP Login Password is
set correctly or make sure your user
name is not locked on the mail server.
Make sure the settings for your
account is configured on the mail
server correctly.
Power your machine on, then wait for
a while for charging. If this Error
Message is repeatedly displayed, the
battery must be replaced.
Connect the battery to the Internet
Fax unit correctly. If this error mes-
sage is repeatedly displayed, replace
the battery.
Wait until sending the E-mail is
finished.
Wait until printing the E-mail is
finished.
Wait until analyzing the MIB is
finished.
Wait until the FTP transmission is
finished.
5-4
Solution
-
Solution
Solution
May 2001 © TOSHIBA TEC