User(U)/Jam(J) Error Codes - Toshiba e-STUDIO 191F Operating Instructions Manual

Plain paper facsimile
Hide thumbs Also See for e-STUDIO 191F:
Table of Contents

Advertisement

Problem Solving
User(U) / Jam(J) Error Codes
1234
User Codes (U Code)
Code
U06
Right Cover is open.
U07
Jam Cover is open.
U13
Low Toner or Out of Toner. (See page 40)
Jam Error Codes (J Code)
Code
J01,
Remove the jammed paper from the tray(s).
J02
(See page 47)
Check to make sure the Paper Guides are
properly adjusted in the tray(s). (Refer to
the Operating Instructions (For Advanced
Operations) on the provided CD-ROM)
J43,
Remove misfed paper(s) inside the
J44
machine. (See page 49)
NOTE
1. The J## Code indicates the most probable Jam location. If the jam message reappears after the jam is cleared, paper is
most likely jammed at other location(s). Check the Jam Error Codes Table above for other check points and remove all
misfed paper.
2. Make sure that the Jam Error Code disappears after removing the misfed paper.
3. The Jam Error Code will not disappear if the paper is still jammed in the machine. Check again and remove all misfed
paper.
4. When the Machine Error Code (E Code) (for service personnel) appears on the display, reset the machine by first unplug-
ging the power cord of the machine from the wall outlet. Wait for a few seconds and plug the power cord of the machine
in the wall outlet again. If the E Code reappears, contact your local TOSHIBA Authorized Dealer.
46
U20
Check Points
Check Points
Code
U16
Toner Cartridge is not installed correctly.
U20
ADF Cover is open.
Code
J71,
Remove document(s) in the ADF. (See page
J72,
51)
J74
J75,
J92,
J93
U16
U13
U06
U07
Check Points
Check Points

Advertisement

Table of Contents
loading

Table of Contents