Table of Contents
Advertisement
1.5 Host Name [MENU], [3], [5], [0], [1], [0], [6]
This setting is used to set the name of this machine. This name is used as the sender name for
E-mails.
(1)
Enter the Host Name, then press the [ENTER] key.
HOST NAME
(MAX 254:)
HOST NAME
Enter the name to identify this machine.
(2)
After the "OPERATION COMPLETED" message is displayed, the display return to the
TCP/IP menu.
(3)
Continue to set another item, or press [0] + [1] to select "1.DONE" to exit the menu
operation mode and return to the Standby Mode. The Network Interface Card starts
initializing. Wait for few minutes until the Network Interface Card completes initializing.
May 2001 © TOSHIBA TEC
3-5
Internet Fax Kit - Function Settings
Advertisement
Table of Contents
