Supermicro 6028R-E1CR12T User Manual page 96

S S
UPER ERVER 6028R-E1CR12T User's Manual
Long Pwr (Power) Limit Ovrd (Override)
Select Enable to support long-term power limit override. If this feature is disabled,
BIOS will set the default value. The options are Enable and Disable.
Long Dur (Duration) Power Limit
This item displays the power limit set by the user during which long duration
power is maintained. The default setting is 0.
Long Dur (Duration) Time Window
Use this item to set the time window value (in seconds) over which the TDP
(Thermal Design Point) should be maintained. The default setting is 1, which will
allow the value to be automatically programed by the system.
Pkg (Package) Clmp (Clamping) Limit1
Use this item to set the limit on power performance states for the runtime proces-
sor, with P0 being the state with the highest frequency (clock speed) and power
(consumption), and P1, a step lower in performance than P0, with its frequency
and voltage scaled back a notch. The options are Between P1/P0 and Below P1.
Short Dur (Duration) Pwr (Power) Limit En (Enable)
Select Enable to support Short Duration Power Limit (Power Limit 2). The options
are Enable and Disable.
Short Dur (Duration) Pwr (Power) Limit
This item displays the time period during which short duration power is main-
tained. The default setting is 0.
Pkg (Package) Clmp (Clamping) Lim2
Use this item to set the limit on power performance states for the processor
operating in turbo mode, with P0 being the state with the highest frequency
(clock speed) and power (consumption), and P1, a step lower in performance
than P0, with its frequency and voltage scaled back a notch. The options are
Between P1/P0 and Below P1.
DRAM RAPL (Running Average Power Limit) Configuration
DRAM RAPL (Running Average Power Limit) Baseline
Use this item to set the run-time power-limit baseline for DRAM modules. The
options are Disable, DRAM RAPL Mode 0, and DRAM RAPL Mode 1.
7-10