Supermicro 6028R-E1CR12T User Manual page 123

The following settings will be displayed:
Data Bits, Parity, Stop Bits
Trusted Computing (Available when a TPM device is
installed and detected by the BIOS)
Configuration
Security Device Support
If this feature and the TPM jumper on the motherboard are both set to Enabled,
onboard security devices will be enabled for TPM (Trusted Platform Module) sup-
port to enhance data integrity and network security. Please reboot the system for
a change on this setting to take effect. The options are Enabled and Disabled.
TPM State
Select Enabled to use TPM (Trusted Platform Module) settings to enhance system
data security. Please reboot your system for any change on the TPM state to take
effect. The options are Disabled and Enabled.
Pending Operation
Use this item to schedule a TPM-related operation to be performed by a security
device for system data integrity. Your system will reboot to carry out a pending TPM
operation. The options are 0, Enable Take Ownership, Disable Take Ownership,
and TPM Clear.
Note: Your system will reboot to carry out a pending TPM operation.
Current Status Information
This item displays the status of the TPM support on this motherboard.
Intel TXT (LT-SX) Configuration

This submenu allows the user to configure the following TXT settings.
TXT Support
Select Enabled to enable Intel Trusted Execution Technology (TXT) support. The
options are Disabled and Enabled.
Note: If the option for this item (TXT Support) is set to Enabled, be sure
to disable EV DFX (Device Function On-Hide) support for the system to
work properly. (EV DFX is under "IIO Configuration" in the "Chipset/North
Bridge" submenu on Page 4-11).
7-37
Chapter 7: BIOS