Air Shroud - Supermicro 6028R-E1CR12T User Manual

6-5

Air Shroud

Air shrouds concentrate airflow to maximize fan efficiency. The SC826 chassis air
shroud does not require screws to set up.
Installing the Air Shroud
1. Lay the chassis on a flat, stable surface and remove the chassis cover.
2. If necessary, move any cables that interfere with the air shroud placement.
3. Place the air shroud in the chassis. The air shroud fits just behind the two
fans closest to the power supply. Slide the air shroud into the grooves just
behind the fan rack.
4. If necessary, the perforated tabs on either side of the air shroud may be
removed to ensure a proper fit.
Perforated Tabs
Figure 6-4. Replacing the Air Shroud
6-5
Chapter 6: Advanced Chassis Setup
Perforated Tabs