Installing Memory - Supermicro 6028R-E1CR12T User Manual

S S S
UPER TORAGE
5-5

Installing Memory

Note: Check the Supermicro website for recommended memory modules.
Exercise extreme care when installing or removing DIMM modules
Installing DIMMs
1. Insert the desired number of DIMMs into the memory slots, starting with slot
DIMMA1.
2. Push the release tabs outwards on both ends of the DIMM slot to unlock it.
3. Align the key on the DIMM module with the receptive point on the slot.
4. Use two thumbs together to press on both ends of the module straight down
into the slot until the module snaps into place.
5. Press the release tabs to the lock positions to secure the DIMM module into
the slot. See Figure 5-3.
Release Tab
Socket Key
YSTEM 6028R-E1CR12T User's Manual
CAUTION
to prevent any possible damage.
Figure 5-3. Installing DIMM into Slot
5-8
Release Tab