System Mode; Procedures In Tuner Mode - Roland GR-33 Owner's Manual

System Mode
In this mode you can make settings for the entire GR-33 -
i.e., settings that do not change when you switch patches -
such as input sensitivity and display brighh1ess.
In System mode, the buttons and dials work as follows:
[BANK/PARAMETER] Button
Use these buttons to select the parameter that you wish to
adjust.
[PLAY] Button
Returns you to Play mode.
[SYSTEM] Button
Has no function in this mode.
[TUNER] Button
Switches to Tuner mode (p. 18).
[WRITE] Button
Writes the contents of a patch. This is disabled during
"BULK LOAD" (p. 37). It is used for initiating procedures
and for confirmation in "BULK DUMP" and "FACTORY
RESET" (p. 37,
16).
[COMMON] Button
Switches to Patch Edit mode, COMMON (overaJl patch
settings).
Procedures in Tuner Mode
In Tuner mode, the buttons and dials work as follows.
[BANK/PARAMETER] Button
Has no function in this mode.
[PLAY] Button
Returns you to Play mode.
[SYSTEM) Button
Switches to System mode (settings for the GR-33 itself).
[TUNER] Button
Has no function in this mode.
[WRITE] Button
Has no function in this mode.
[COMMON] Button
Switches to Patch Edit mode, COMMON (overall patch
settings).
[TONE] Button
Switches to Patch Edit mode, TONE (sound-related patch
settings).
Chapter 4 Five Basic Modes
I
[TONE] Button
Switches to Patch Edit mode, TONE (sound-related patch
settings).
[EFFECTS] Button
Switches to Patch Edit mode, EFFECTS (effect-related patch
settings).
[STRING SELECTI Button
Has no function in this mode.
[OUTPUT SELECTI Button
Changes the output device selection (p. 19).
[PATCHNALUE] Dial
Changes the value for the selected parameter.
PedaI1-4
Has no function in this mode.
Expression Pedal
Changes the value of the selected parameter (p. 47).
GK-2A [S1] and [S2]
Changes the value for the selected parameter.
External Bank Shift Pedal
Changes the value for the selected parameter.
[EFFECTS] Button
Switches to Patch Edit mode, EFFECTS (effect-related patch
settings).
[STRING SELECTI Button
Has no ftmction in this mode.
[OUTPUT SELECTI Button
Changes the output device selection (p. 19).
[PATCHNALUE) Dial
Changes the value for the "MASTER TUNE".
PedaI1-4
Exits Ttmer mode and returns you to Play mode.
Expression Pedal
Changes the value of the selected parameter (p. 47).
GK-2A [S1] and [S2]
Exits Tuner mode and returns you to Play mode.
External Bank Shift Pedal
Exits Tuner mode and returns you to Play mode.
33
I