Table of Contents
Advertisement
FL FEEDBACK (Flanger feedback level) -98-+98 %
Specify the proportion
(%)
of the flanger sound that is to be
returned to the input.
Positive (
+)
settings will return the sound to the input with
the original phase, while negative(-) settings produce an
inverted phase.
You can set a value from -98% to +98%, in steps of 2%. There
is no feedback when the value is zero.
FL BALANCE (Flanger Balance) DIOO:OE-DO:lOOE
Specify the volume balance between the chorus sound that
passes through the flanger and the chorus sound that does
not pass through the flanger.
With n setting of DlO0:0E only the chorus sound will be
output, and with a setting of D0:lO0E only the chorus that
passes through the flanger sound will be output.
LEVEL (Output level) 0-127
Specify the output volume.
38: CHO/DL Y (Chorus/Delay)
This effect connects a chorus and a delay in pnrallcl. The
parameters are essentially the same as "35: CHO~ DLY."
However, Delay Balance specifies the volume balance
between the original sound and the delay sound.
Balance D
Chorus
Feedback
Balance D
39: FL/DLY (Flanger/Delay)
This effect co1mects a flanger and a delay in parallel. The
parameters arc essentially the same as "36: FL~ DLY."
However, Delay Balance specifies the volume balance
between the original sound and the delay sound.
Balance D
Feedback
Feedback
Balance D
Chapter 6 Using the Built-in Effects
I
40: CHO/FL (Chorus/Flanger)
This effect connects a chorus and a flanger in parallel. The
parameters are essentially the same as "37:CHO
~
FL."
However, Flanger Balance specifies the volume balance
between the original sound and the flanger sound.
Balance D
Chorus
Feedback
Balance D
73
I
Advertisement
Table of Contents
