Table of Contents
Advertisement
Chapter 6 Using the Built-in Effects
DELAY CENTER (Delay time center)
Specify the delay time from the original sound until the
center delay sound is heard.
*
The setting values are the same as for DELAY LEFT.
FEEDBACK (Feedback level) -98%-+98% #
Specify the proportion
('}i,)
of the delay sound that is to be
returned to the input.
Positive(+) settings will return the sound to the input with
the original phase, while negative (-) settings produce an
inverted phase.
HF DAMP
200/250/315/400/500/630/800/1 000/1250/1600/2000/2500/3150/
4000/5000/6300/8000 (200-8000 Hz), Bypass
Specify the frequency at which the high frequency range of
the delayed sow1d returned to the input will be cut.
If you do not want the sound to be cut, select Bypass.
LEFT LEVEL 0-127
Specify the volume of the left delay sound.
RIGHT LEVEL 0-127
Specify the volume of the right delay sound.
CENTER LEVEL 0-127
Specify the volume of the center delay sound.
LOW GAIN • 15-+ 1 S dB
Specify the gain (amount of boost or cut) for the low
frequency range.
Positive(+) settings will emphasize (boost) the low
frequency range.
HIGH GAIN • 1 5-+ 15 dB
Specify the gain (amount of boost or cut) for the high
frequency range.
Positive(+) settings will emphasize {boost) the high
frequency range.
BALANCE (Effect balance) D 100:0E-DO: 1 00E
Specify the volume balance between the original sound and
the delay sound.
With a setting of D100:0E only the original sound will be
output, and with a setting of D0:lO0E only the delay sound
will be output.
LEVEL (Output level) 0-127
Specify the output volume.
64
20: 4-TAP-DELAY (Quadruple Tap Delay)
Quadruple-tap-delay provides four delays. The delay time
for each delay can be specified as a note length relative to a
specific tempo.
Balance D
Balance D
DELAYl (Delay time 1) 200-1000 ms
Specify the delay time from the original sound until the delay
1 sound is heard.
*
Tile setting values for Delay Time 2 to Delay time
4
are the
sa1nc.
DELA Y2 (Delay time 2)
Specify the delay time from the original sound until the delay
2 sound is heard.
DELA Y3 (Delay time 3)
Specify the delay time from the original sound until the delay
3 sound is heard.
DELAY4 (Delay time 4)
Specify the delay time from the original sound until the delay
4 sound is heard.
LEVEL 1 0-127
Specify the volume level of delay
1.
LEVEL2 0-127
Specify the volume level of delay 2.
LEVEL3 0-127
Specify the volume level of delay 3.
LEVEL4 0-127
Specify the volume level of delay 4.
FEEDBACK (Feedback level) -98%-+98% #
Specify the proportion
(%)
of the delay sound that is to be
returned to the input.
Positive(+) settings will return the sound to the input with
the original phase, while negative(-) settings produce an
inverted phase.
Advertisement
Table of Contents
