Table of Contents
Advertisement
I
Panel Descriptions
17 MIX OUT Jacks L(PHONES)/R(MONO)
The output of the synthesizer is sent out, or "output,"
from here. Ordinarily, two cables are plugged into the
Land R jacks, and the signal is then sent to a stereo
amplifier.
You can use the L (PHONES) jack as a headphone jack
for stereo headphones that have a standard 1/4" stereo
plug-leave the R (MONO) jack unplugged.
You cannot simultaneously use the R (MONO) jack as a
mono output while using the L (PHONES) jack as a
headphone jack.
When there is nothing connected to the GUITAR OUT
jack, the sow1d of the guitar itself is also mixed into
these outputs.
* In order to fully experience the quality of tlzefactory-i11stal/ed
patches, we recommend using a
stereo
amplifier
or
stereo
headphones. Wizen co11necti11g the GR-33 to a
1110110
amp, use
only the R (MONO) jack.
18 GUITAR RETURN Jack L/R(MONO)
When using the GUITAR OUT jack (see below) as an
external effect send, use this jack to return the signal.
The synthesizer sound and the guitar sound with
effects are output together from the MIX OUT jacks.
19 GUITAR OUT Jack
Use this jack when you want the guitar sound to be
output from the GR-33 separately from the synth
sound. Connect the jack to your guitar amp or guitar
effects devices.
20 BANK SHIFT Jack
12
Use this jack for connecting a patch bank expansion
foot switch to the GR-33.
You can connect two Boss FS-SU foot switches using a
PCS-31 cable (each sold separately). Expansion foot
switches control different functions in all modes except
Play mode.
21 GK IN Connector
Use this special 13-pin branch cable, included with the
GR-33, to connect the GK-2A divided pickup (sold
separately).
*
For connection to a guitar designed.for use with a synthesizer,
consult the guitar's manufacturer
or
your dealer.
22 MIDI Connectors (MIDI IN/OUT)
Plug MIDI cables into these jacks to c01mect the GR-33
to an external MIDI device. Do this when you want the
GR-33 to control sounds in an external MIDI sow1d
generator module, or to load tone data stored on an
external MIDI storage device.
23 Power Switch
This is the switch that turns power to the GR-33 on and
off.
24 AC Adapter Jack/Cord Hook
Connect the AC adapter included with the GR-33 to
this jack. Hang the adapter cord on the cord hook to
help prevent the accidental pulling out of the cord from
the jack while you are playing.
* llse ONLY the AC ada11tcr included with this guitar
synthesizer.
The explanations in this manual include illustrations that
depict what should typically be shown by the display.
Note, however, that your tmit may incorporate a newer,
enhanced version of the system (e.g., includes newer
sounds), so what you actually see in the display may not
always match what appears in the manual.
~
,
Advertisement
Table of Contents
