For successful operation of your tape library, place the bar code label entirely
within the recessed area, ensuring that no part of the label is outside of it (see
Figure
Figure 18: Proper Ultrium bar code label placement
SDLT bar code labels
SDLT cartridges have a front slide slot located on the face of the cartridge next to
the write-protect switch (see
into the slot.
ESL E-Series Tape Library User's Guide
18).
Caution:
Do not apply labels to the top, bottom, sides, or back of the
cartridge as this may cause damage to the tape drive, or interfere with reliable
operation.
Figure
19). Inserting the bar code label by sliding it
Library Operations
51