Potentiometer - Siemens SITOP Manual

Description, device design, dimension drawing

2.3 Potentiometer

2.3 Potentiometer
The potentiometer
output current. When delivered, the maximum possible response threshold is set.
Figure 2-3
Note
It is only permissible to use an insulated screwdriver when actuating the potentiometer.
For information on actuating the potentiometer (screwdriver, torque), see Figure 2-2
Terminal data (Page 13).
Note
For SITOP PSE200U, the actual output current of a branch can be determined by measuring
the voltage at measuring point "MP"
voltage of 1 V corresponds to an output current of 1 A.
14
⑤
on the front of the device is used to set the response threshold of the
Potentiometer (SITOP select and SITOP PSE200U)
⑦
with respect to the "0 V" terminal. A measured
Manual, 01.2017, C98130-A7579-A1-2-7629
Selectivity modules