Table of Contents
Advertisement
2.3
Potentiometer
The potentiometer
output voltage is set to 24 V in the factory, and can be adjusted in the range 24 - 28.8 V; for
example, to compensate voltage drops across long supply lines to the connected load.
Figure 2-5
NOTICE
Thermal overload possible
When adjusting the output voltage to > 24 V, the output current must be derated by 4 %/V,
or the permissible ambient temperature must be taken into account with 3 °C/V.
Note
It is only permissible to use an insulated screwdriver when actuating the potentiometer.
For notes on actuating the potentiometer (screwdriver, torque), see Chapter Figure 2-3
Terminal data for 6EP1536-3AA00 (Page 11).
SITOP PSU400M
Manual, 05.2018, C98130-A7601-A1-5-7629
④
on the front of the device is used to adjust the output voltage. The
Potentiometer
Description, device design, dimension drawing
2.3 Potentiometer
13
Advertisement
Table of Contents
