Docomo arrowsbe F-05J Instruction Manual page 73

e Set MUTE to ON/OFF
When it is set to ON, your voice cannot be heard by the
other party.
f Call time
g Calling (high-quality sound)
･
Appears during a call with high quality sound.
h Set speaker phone to ON/OFF
･
When connecting a Bluetooth device, tap to switch voice
output devices.
i Switch to video
Tap to display a selection screen for switching to video call
on the other party's terminal. If it is accepted, switching to
video call is available.
･
To switch to voice call during a video call, tap
[Switch to voice call].
j Display submenu
During a voice call : Operate ON/OFF of Voice clear, ON/OFF
of Voice slowing, Hold
another party using the call waiting.
During a video call: Switching operations of audio, dial
keys, speech output, camera OFF/ON, image area of yours
and third party's are available.
* To use Hold function, Call waiting subscription is
required.
k Image of the other party
･
If receiving the other party's image is not available or the
camera function turns off because the screen changes to
another screen, is displayed.
･
Tap the screen to switch the other party's image between
in full-screen and normal screen.
l Your image
*
/Cancel hold, add a call with the
m Switch camera for sending image
Switch camera (in-camera/out-camera) to shoot image for
sending.
✔INFORMATION
･
Enable Voice clear to improve call sound to be heard clearly
by emphasizing the other party's voice or adjusting the
listening sound.
･
Setting Voice slowing to ON adjusts the other party' voice
speed so that his/her voice can be heard slowly and easily. If
the other party speaks without pause, the voice is heard with
normal speed.
･
For subscribers of Call waiting, during a voice call, tap
→
[Add call] to make a second call.
･
When speaker phone is ON, you can talk handsfree using the
speaker.
･
During a video call, to switch voice output when connecting
a Bluetooth device,
Select the voice output device.
･
During a video call, when a calling screen is not displayed
because you change to another screen, your image will not
be sent to the other party.
･
While in multi-connection such as using call waiting, status of
Voice clear/Voice adjusting/Voice slowing does not appear.
･
Voice clear, Voice adjusting and Voice slowing do not support
video calls.
71
→[Switch audio output destination]→
→
Calling