Tethering - Docomo arrowsbe F-05J Instruction Manual

Tethering

Tethering is a function for using mobile devices such as
smartphones as modems to allow external devices connected
via USB cable, Wi-Fi or Bluetooth communications to access
the Internet.
･
While tethering is enabled, for using sp-mode function other
than Internet connection and mail service, authentication
may not be available or sign in by d ACCOUNT may be
required. When authentication is not available, disable
tethering to use.
･
When you connect to Internet using tethering, Wi-Fi device
applications such as web browser or game may not work
properly depending on the condition of use.
◆ USB tethering
Connect the terminal to a PC using USB cable A to B 01
(optional) to use the terminal as a modem to access the
Internet.
1 Connect the terminal and a PC with the USB
cable
2
Open the Notification panel→Tap the
notification of USB option
3
[USB tethering]→Turn [USB tethering] to ON
✔INFORMATION
･
Operations for Windows7, Windows 8.1, and Windows 10
PCs are confirmed. Note that DOCOMO does not guarantee
the operations of every PC.
◆ Wi-Fi tethering
You can allow Wi-Fi devices to access the Internet by using the
terminal as Wi-Fi hotspot.
･
You can connect up to 10 Wi-Fi devices.
･
Only 2.4 GHz is supported for tethering.
1
From the Home screen,
[Wireless & networks]→[More]→[Tethering]
2 Set [Wi-Fi tethering] to ON
･
If the Wi-Fi hotspot screen is displayed, change the
settings as needed and tap [SAVE].→P129
◆ Setting Wi-Fi tethering
Change the settings as needed.
･
By default, [F-05J_AP] is set for Network name, [WPA2 PSK
AES] is set for Security, and a random value is set for
[Password].
1 From the Home screen,
[Wireless & networks]→[More]→[Tethering]→
[Wi-Fi access point]
2 Enter a network SSID→Select an option for
Security→Enter the password→[SAVE]
･
Security can be set to [Open], [WEP64], [WEP128],
[WPA2 PSK AES], or [WPA/WPA2 PSK].
129
→[Settings]→
→[Settings]→
Settings