❖
Pinch
Touch the screen with two fingers and widen (pinch-out) or
narrow (pinch-in) the fingers distance.
❖
Flick
Touch the screen and sweep the finger quickly.
◆ Switching the portrait/landscape view
The terminal supports a motion sensor that senses orientation
or motion of the terminal. You can switch display view by
tilting the terminal vertical or horizontal (Auto-rotate screen→
P133).
・
Even when you change the orientation of the terminal, the
screen may not change depending on the screen displayed.
・
Lock the screen to the direction you look when it rotates
automatically by changing your posture holding the
terminal (Shake to unrotate→P134).
◆ Screenshot
You can save a screen displayed on the terminal as an image.
・
Some screens may not be saved.
Press and hold P and volume down key at the
1
same time (1 sec. or more)
Screen shot is saved and
・
To check the image, flick the status bar downward to
open the Notification panel (→P52), and tap a
notification of screenshot→Select an application, or
from the Home screen, [Gallery]→[Screenshots].
39
appears on the status bar.
Before using the terminal
Need help?
Do you have a question about the arrowsbe F-05J and is the answer not in the manual?