Cellular Networks - Docomo arrowsbe F-05J Instruction Manual

◆ Disconnecting VPN
1
From the Home screen,
[Wireless & networks]→[More]→[VPN]
2
Select a VPN to disconnect
3 [DISCONNECT]

Cellular networks

Disable data communication or add an access point.
◆ Stopping the packet communication
Some applications automatically perform packet
communications. Packet communication is kept active unless
you cut off the connection or the time-out occurs. Activate or
deactivate packet communication as required.
1
From the Home screen,
[Wireless & networks]→[More]→[Cellular
networks]
2
Turn [Data enabled] to OFF
3 Check the content and [OK]
→[Settings]→
→[Settings]→
131
◆ Setting access point (APN)
Access point for connecting to the Internet (sp-mode) is
already registered. You can add and change access points if
necessary.
For details on sp-mode, refer to NTT DOCOMO website.
https://www.nttdocomo.co.jp/service/spmode/ (In Japanese
only)
For using mopera U, Business mopera Internet, add the access
point manually.
For details on mopera U, refer to mopera U website.
https://www.mopera.net/ (In Japanese only)
･
When Tethering is set to on, access point setting is
unavailable.→P129
❖
Checking the access point in use
1 From the Home screen,
[Wireless & networks]→[More]→[Cellular
networks]→[Access Point Names]
❖
Adding an access point
･
Do not change the MCC/MNC to other than 440/10. The
setting disappears from the screen.
1 From the Home screen,
[Wireless & networks]→[More]→[Cellular
networks]→[Access Point Names]
2 [＋]
3 [Name]→Enter a network profile→[OK]
→[Settings]→
→[Settings]→
Settings