Useful tools
Set Slide-in function, Pedometer, etc.
1
From the Home screen,
tools]
2
Set required items
Voice call : Setting steps→P75
Glove touch : Setting steps→P158
Slide-in function : Setting steps→P158
Slide display : Setting steps→P159
Pedometer : Setting steps→P159
Earphone Launcher : Set the terminal to display a
launcher when earphones are connected, so that you can
launch applications from there.
・
Applications displayed in the launcher can be set in
[Launcher setting].
◆ Glove touch
Set whether to improve the sensitivity of the touch panel so
you can use touch gestures on the terminal with gloves on.
1
From the Home screen,
tools]
2
Mark/Unmark [Glove touch]
→[Settings]→[Useful
→[Settings]→[Useful
✔INFORMATION
・
Depending on the material of the gloves, you may find touch
operation difficult.
・
If this is the case, tilt your fingers to bring the pads of the
fingers into contact with the touch panel when operating the
terminal.
・
If [Glove touch] is marked and you use touch gestures
without wearing gloves, the terminal may perform
unintendedly.
・
Note that unintended operation may be executed if you put
the terminal in a pocket or a bag with the backlight ON when
[Glove touch] is marked. Let the terminal go to sleep mode
when putting the terminal in a pocket etc.
◆ Slide-in function
Configure settings so that you can slide your finger from the
edge of the screen to bring up the launcher, from which you
can launch applications, or to capture a screen shot, or so that
you can slide your finger along lines of text to copy them.
1
From the Home screen,
tools]→[Slide-in function]
2
Set [Slide-in function] to ON
3
Set required items
・
Tap [Function Description] to show how to use Slide-in
launcher, Capture & Draw/Highlight & Copy.
✔INFORMATION
・
When applications registered to the launcher are updated,
the registration may be canceled.
158
→[Settings]→[Useful
Settings
Need help?
Do you have a question about the arrowsbe F-05J and is the answer not in the manual?