Emergency Mode - Docomo arrowsbe F-05J Instruction Manual

◆ Emergency mode

In case of emergency such as disaster, reduce the battery
consumption by restricting the screen brightness or turning off
functions.
Press and hold P until the phone options menu
1
appears
2 [Emergency mode]→[OK]
The terminal restarts and Emergency mode is set.
･
To cancel the setting, perform the same operations
again or from the Home screen for Emergency mode,
tap [Stop saving]→[OK].
✔INFORMATION
･
Alternatively, from the Home screen, tap
→[OK] for setting Emergency mode.
･
In Emergency mode, the setting is not canceled by turning
the power off.
◆ Application permissions
The first time you launch an application or function that
accesses other functions and information on the terminal, a
confirmation screen that requests authorization for access
rights appears. When you approve these access rights, the
corresponding functions and information become available to
the application or function.
･
Confirmation screens vary depending on the application or
function. Check the displayed content carefully and operate.
<Example> When launching the "Gallery" app for the
1 From the Home screen, [Gallery]
The confirmation screen is displayed.
→[Disaster kit]→
2
[DENY]/[ALLOW]
Follow the on-screen instructions.
✔INFORMATION
･
If permission is not granted, some applications and functions
may not work, or use of the functions may be limited.
･
To change the permissions, from the Home screen,
[Settings]→[Display/Sound/Apps]→[Apps]→Tap the
application→[Permissions]→Turn ON/OFF permissions to
change.
40
first time
Before using the terminal
→