Docomo arrowsbe F-05J Instruction Manual page 155

✔INFORMATION
･
You can set to require authentication when unpinning
application by setting [Security authentication for unpinning]
to ON in Step 2.
◆ Encryption settings
❖
Encrypt phone
Encrypt all data (including settings and applications) in the
terminal. After encryption, you may need to enter security
code, password, or pattern to decrypt each time you turn the
terminal on. To disable encryption, you need to reset the
terminal to default.
･
Charge the battery fully and perform the operation while
charging.
1
From the Home screen,
[Security]→[Information security]→
[Encryption settings]
2
[Encrypt phone]→[ENCRYPT PHONE]→
[ENCRYPT PHONE]
･
When a security unlock preference which requires
authentication is selected, authentication is required.
→[Settings]→
153
❖
Encrypt SD card
Encrypt all data in the microSD card installed to the terminal.
･
Set [Security code] or [Password] for the security unlock
preference in advance.→P145
･
Charge the battery fully and perform the operation while
charging.
1 From the Home screen,
[Security]→[Information security]→
[Encryption settings]
2 [Encrypt SD card]→[ENCRYPT SD CARD]→
Authenticate→[ENCRYPT SD CARD]→[OK]
Disabling encryption :
[UNENCRYPT SD CARD]→Authenticate→
[UNENCRYPT SD CARD]→[OK]
✔INFORMATION
･
Data of encrypted SD card will not be able to use with other
terminal except this terminal. If data reset is performed, data
of encrypted microSD card cannot be used, therefore disable
microSD card encryption before resetting the terminal.
→[Settings]→
[Unencrypt SD card]→
Settings