Docomo arrowsbe F-05J Instruction Manual page 111

■ Exposure/WB
Set whether to display the icons for exposure correction (
white balance adjustment (
◆ QR code reader
Scan QR code data and use it.
･
QR code cannot be scanned for some versions (type and
size).
･
Scratches, dirt, damages, low print quality and the strong
reflection of light may disable code reading.
❖
Reading with QR code reader
･
Scan using the camera with the distance of approximately
10 cm or more from an object (QR code).
･
If the QR code is not scanned well, try to change the distance
between the QR code and camera, the angle or direction of
camera.
1 From the Home screen, [Camera]
2 [MENU]→[QR code]
The QR code shooting screen appears.
3 Display a QR code on the shooting screen→
Scan
A confirmation sound is played when scanning is
complete and the scanned data appears.
Scanning divided data :
One data item divided into multiple (up to 16) QR codes
can be scanned and be displayed as a combined data.
Continue reading if unscanned data exists.
) on the shooting screen.
Closing the QR code shooting screen :
･
Return to the previous shooting mode before setting to
)/
Reading with QR code reader.
Turning the light ON/OFF :
OFF]
4 Check scanned data
Saving data : On the scanned data, [MENU]→[Save to
history]→Tap history field
Displaying history :
[MENU]→[History]→Select a history
❖
Using QR code data
Use the scanned QR code data.
･
Displayed menu options may vary depending on the
scanned data.
Saving all data in the phonebook :
contacts]→Save in the phonebook
Creating mail : Select mail address to create a message→
Create a mail
Connecting to the website or home page :
Making a call : Select a phone number→
109
[←]
[MENU]→[Light ON]/[Light
On the QR code shooting screen,
[MENU]→[Batch register
Select URL
Applications