Table of Contents
Advertisement
2
Basic Operation and Configuration
2.4
The following procedures describe how to do the most common bench test camera configuration
steps, such as setting the camera IP address and hostname and changing the user password. To
make these changes, it is necessary to login using the expert user account. Additional setup and
configuration options required after the camera has been installed in its final location are described
after the basic steps are given, refer to
2.4.1
The Setup menu is used for GEO Settings (Latitude and Longitude location), Video setup, and
thermal (IR) camera setup. For additional details, refer to
Adjustments to the IR settings should only be made by someone who has expertise with thermal
cameras and a thorough understanding of how the various settings affect the image. In most
installations, the only camera settings needed are available from the Web Control panel on the Live
Video page (Palettes and Polarity). Haphazard changes can lead to image problems including a
complete loss of video. Additional information is provided in
When making configuration changes using the Setup page, most of the changes take effect
immediately, and it is not necessary to start and stop the server. However it is necessary to save the
changes (with the Save Settings button at the bottom of the page) if it is desirable to use the new
settings as a default when the camera is powered on.
When a user logs in as admin, a complete Maintenance menu is available (refer to
Menu, pg.
more information on setting or changing other camera parameters refer to the Nexus IP Camera
Configuration Guide (FLIR Doc #427-0030-00-28).
2.4.2
When a user logs in as expert or admin, the Maintenance Server menus are
available. When the Server menu is selected, the LAN Settings page appears.
The basic camera configuration steps are accessed through the Maintenance
Server menu, using the menus on the left side of the page. The LAN Settings,
Services, and Security Options selections are described below. The expert
login has access to these Server pages, but will only see the security settings
for the user login.
With most configuration changes through the Maintenance menu, it is
necessary to save the changes, then stop and restart the server to make the
changes take effect.
427-0064-00-12 Version 100
Basic Camera Configuration
Setup Menu
31). The Maintenance menu also provides access to other configuration options. For
Server Menu
Advanced Configuration, pg.
Setup Menu, pg.
Thermal Image Setup, pg.
August 2017
27.
27.
29.
Maintenance
18
Advertisement
Table of Contents
