FLIR FB-Series O User And Installation Manual page 22

2 Basic Operation and Configuration
Security Options: Use the Security Options page to restrict access through the camera web
server to specific IP addresses and to set or change passwords. As shown below, the expert login
can only configure the user login password.
As an additional security measure, limit which computers have access to the web browser interface.
Simply add a computer's IP address and click Add. After all the allowed IP addresses are entered,
select the Save button to save the changes.
Note
A VMS Remote to the camera, ONVIF or Nexus CGI, uses the same password as the web interface.
Changing the password in either interface changes the password in both.
Refer to
To maintain security of the system set new passwords for
each of the three login accounts (requires the admin login).
user—The user account can only use the Live Video
•
page and controls.
expert—The expert account can use the Live Video
•
page, the camera Setup page, and the Server pages
on the Maintenance menu.
admin—The admin account can use all pages.
•
After a password is set and confirmed, select the Save
button at the bottom (scroll down the page, if necessary).
427-0064-00-12 Version 100
VMS Remote, pg. 32.
August 2017
Add IP
address
22