15
Pin configurations and
schematics
15.1 Pin configuration for camera I/O connector
Pin
1
2
3
4
5
6
Note Cables for digital I/O ports should be 100 m (328') maximum.
15.2 LED indicators
The LEDs indicate the following:
Type of signal
The LED glows continuously orange.
The LED glows continuously red.
The LED glows continuously green.
The LED flashes 10 times per second.
#T559950; r. AD/35720/35720; en-US
Function
IN 1
IN 2
OUT 1
OUT 2
Supply VCC
Supply Gnd
Explanation
The camera is starting up.
An error has been detected. Contact service.
The camera has started.
An error has been detected. Contact service.
Data
opto-isolated, 0–1.5 V = low, 3–
25 V = high
opto-isolated, 0–1.5 V = low, 3–
25 V = high
opto-isolated, ON = supply
(max. 100 mA), OFF = open
opto-isolated, ON = supply
(max. 100 mA), OFF = open
6–24 VDC, max. 200 mA
Gnd
62