Mounting Accessories; Site Preparation - FLIR FB-Series O User And Installation Manual

Hide thumbs

Table Of Contents

Table of Contents

Camera Installation

1.3.4

The following mounting accessories are available from FLIR Systems, Inc. for installing the

FB-Series O camera. For more information on available options, contact your FLIR sales

representative or visit

need.

1.3.5

There are several requirements to address prior to installation at the site. The following

recommendations provide for proper installation and operation of the unit. Adhere to all local and

industry standards, codes, and best practices.

•

Ambient Environment Conditions: Avoid positioning the unit near heaters or heating system

outputs. Avoid exposure to direct sunlight.

•

Safety: Cables and electrical cords should be routed in a manner that prevents safety hazards.

Ensure that nothing rests on the unit's cables or power cords.

•

Ample Air Circulation: Leave enough space around the unit to allow free air circulation.

•

Cabling Considerations: Using a cable longer than the manufacturer's specifications for optimal

video signal may result in degradation of color and video parameters.

•

Physical Security: The unit provides threat detection for physical security systems. In order to

ensure that the unit cannot be disabled or tampered with, the system should be installed with

security measures regarding physical access by trusted and untrusted parties.

•

Network Security: The unit transmits over IP to security personnel for video surveillance. Proper

network security measures should be in place to assure networks remain operating and free from

malicious interference. Install the unit on the backbone of a trusted network.

•

Electrostatic Discharge Safeguards: The unit and other equipment connected to it (relay

outputs, alarm inputs, racks, carpeting, etc.) shall be properly grounded to prevent electrostatic

discharge.

427-0064-00-12 Version 100