Table of Contents
Advertisement
2
Basic Operation and Configuration
Services Menu
Date and Time: The Date and Time settings page is used to configure the date and time settings.
The date, time, and time zone can be obtained from an NTP server, or can be entered manually. If
NTP mode is selected, the NTP server information can be entered. The Nexus server must be
stopped before changes can be saved.
Toggle Server (Stop/Start)
Set the date and time parameters, then select the Save button at the bottom of the page. After saving
Server Status, pg.
21.
the settings, reboot the system. Refer to
If the Custom mode is selected, a pop-up window allows the information to be entered manually.
427-0064-00-12 Version 100
August 2017
20
Advertisement
Table of Contents
