FLIR FB-Series O User And Installation Manual page 21

2 Basic Operation and Configuration
Server Status: The Server Status page provides an indication of the current server status (either
running or stopped) and buttons for starting or stopping the server or for rebooting the system.
Toggle Server (Stop/Start)
After making configuration changes, it is necessary to save the changes to the server (there is a
Save button at the bottom of each configuration page). The configuration changes do not take effect
immediately. Generally, it is also necessary to stop and restart the server for the changes to become
effective. The server has a configuration that is active and running, and another configuration that is
saved (and possibly different than the running configuration).
The message at the bottom of the page indicates the
saved configuration is different than the active (running)
configuration, and it is necessary to restart the server.
It may take up to 20 seconds or more to stop the server, especially when there are multiple video
streams open. Be patient when stopping the server.
When the server is stopped and the page is refreshed, the
status will show Server Stopped and the Start button will
be enabled.
Click on the Start button to restart the server, and when the
page refreshes, the status will again show Server Running.
The Start button will be replaced by a Stop button when
the startup procedure has completed.
427-0064-00-12 Version 100 August 2017 21