General Specifications - Ferno SCOOP EXL Stretcher User And Maintenance Manual

Stretcher

3.4 General Specifications

Ferno reserves the right to change the specifications without
notice. For more details, please contact Ferno's Customer
Service (page 2).
Specifications
Load capacity
Weight
Length
Folded
Position 1
Position 2
Position 3
Position 4
Width
Total
Width
Open
Folded
Materials
Structure
TSL
Load capacity
Never exceed the load capacity of
the SCOOP EXL stretcher. Inspect
227 kg
500 lb the stretcher if the carrying capacity
36 st
has been exceeded (see section 6.4
Inspection, page 28).
SWR- Strength to Weight Ratio = 28.4
Safety factor = 2
8
350 lbs 227 kg
17.64 in 8 kg
47.24 in 1200 mm
64.84 in 1647 mm
69.68 in 1770 mm
74.41 in 1890 mm
79.13 in 2010 mm
17 in 432 mm
2.76 in 70 mm
3.15 in 80 mm
HDPE
stainless steel
WARNING
Improper use of the stretcher can cause damage
and / or injury. Use the SCOOP EXL stretcher as
described herein.
WARNING
Untrained users may injure themselves and/or
cause damage and/or physical harm. Allow only
trained and qualified staff to use the SCOOP EXL
stretcher
.
WARNING
Never exceed the load capacity of the stretcher as
specified in this manual.
WARNING
Never connect lifting devices directly to the
stretcher's pins. The pins are intended solely for
connecting the restraint hooks.
USER AND MAINTENANCE MANUAL
To request additional free copies of the
instruction manual, contact Ferno Washington
Italia Customer Service (page 2).
© Ferno Washington Italia ScoopExl - Rel.161115 - ENG
SCOOP EXL Stretcher