Ferno SCOOP EXL Stretcher User And Maintenance Manual page 16

Using the Stretcher
Figure 20 - Aligning the patient's jugular
7. Position the two longitudinal parts under the patient, starting with the head end. If the patient is not cooperative, use a
third operator to hold the patient's head.
8. First close the head end via the TSL, ensuring the immobilizer is set correctly (Figure 22).
9. As the first operator (head end) maintains control of the patient's head, the second operator proceeds to complete the
loading of the patient on the stretcher, and the locking of the foot end using the TSL (Figure 23 and 24).
Figure 22 - Closing the TSL (head end)
Figure 24 - Completion of patient loading
16
Figure 21 - Opening the stretcher
Figure 23 - Closing the TSL (foot end)
WARNING
The operator at the head must check the patient's
alignment is correct, maintain contact with the
patient, and ensure they are on a smooth surface.
© Ferno Washington Italia ScoopExl - Rel.161115 - ENG
SCOOP EXL Stretcher