Ferno SCOOP EXL Stretcher User And Maintenance Manual page 19

SCOOP EXL Stretcher
1. Attach the first hook to pin 7 (Figure 25).
2. Pass the restraint over the patient's legs.
3. Attach the hook to pin 4 on the opposite side.
4. Adjust the restraint correctly so as not to constrict the patient unnecessarily (Figure 30).
Figure 29 - Applying the leg restraint
1. Attach the first hook to pin 6 on the foot end.
2. Attach the second hook to pin 5 on the opposite side.
3. Extend the restraint (Figure 31) to allow creation of a figure-eight shape.
4. Cross the restraint and insert the foot into the loop (Figure 32).
5. Adjust the restraint so that the feet are held properly and securely (Figure 33).
Figure 31 - Extending the foot restraint
© Ferno Washington Italia ScoopExl - Rel.161115 - ENG
BASIN RESTRAINT
Figure 30 - Adjusting the leg restraint
FOOT RESTRAINT
Figure 32 - Inserting the feet through the loop
Using the Stretcher
19