Bandwidth Control - Tenda W303R User Manual

same security mode, encryption mode and key as the ISP' wireless device.
For example
If your ISP wireless device's SSID is "wireless", then just enter the ISP's SSID, wireless
MAC address, and channel respectively into the corresponding fields of the above picture.
If the ISP device is secured, please set your router's encryption type the same as the ISP
device's .Or you can click the "Open scan" button to let the router automatically fill in the
SSID, Channel and wireless MAC. After saving, come back to the WAN Setting screen to
select the corresponding WAN connection type to complete the settings (For example, if
your ISP wireless device's connection type is dynamic IP, just select DHCP).

4.6 Bandwidth Control

Bandwidth control is used to limit the communication traffic of LAN computers when
accessing the Internet. It can simultaneously control maximum of 254 PCs' traffic. In
addition, IP address range configuration is supported.
Enable Bandwidth Control: To enable or disable the internal IP bandwidth control.
The default is disabled.
IP Address: The IP address range of the hosts whose traffic has been controlled. It
can be a single IP address or IP address range.
Upload/Download: To specify the traffic heading way for the selected IP addresses:
upload or download.
Bandwidth Range: The maximum and minimum upload/download data traffic of the
hosts in specified IP range. The unit is KByte/s. The uplink of upload and download
can not exceed the WAN port bandwidth limitation range.
21
11N Wireless User Guide