Available Options; Installation Requirements - Oki MC361dn User Manual

Available Options

The following options are available for your
machine:
 Second tray unit (tray 2)
 Additional RAM (256 MB or 512 MB)
 16 GB SD memory card (MC561 only)
Memo
 There is a 4 GB SD memory card inside the MC561dn. If
you expand the memory capacity, please replace with an
optional 16 GB SD memory card.
Reference
 For details on how to install the options, refer to "Installing
Options" P. 21.
 An SD memory card is used as a storage for spooling when
copying sectors, saving secure print/encrypted print data,
as a storage destination for form data, and for saving auto
delivery and transmission data. For information on secure
print, encrypted secure print, form data, and auto
delivery/transmission data storage functions, please refer
to User's Manual Advanced.

Installation Requirements

Installation Environment
Your machine must be installed in the following
environment:
Temperature:
Humidity:
Maximum wet
bulb temperature:
Note
 Be careful of condensation. It may cause a malfunction.
 If installing your machine where the humidity of the
surrounding air is less than 30% RH, use a humidifier or
antistatic mat.
 Do not install near high temperature or the fire.
 Please do not install in a place from which a
chemical reaction is started (laboratory etc.).
 Do not install near the inflammable solution, such
as alcohol and thinner.
 Do not install in the place which the small child's
hand reaches.
 Do not install in an unstable place (the shaky
stand, leaning place, etc.).
 Do not install in a place many humidity, dusty and
the place where direct rays hit.
 Do not install in the environment of briny air and
corrosive gas.
 Do not install in a place with much vibration.
 Do not install in a place where the ventilation hole
of the machine is closed.
 Do not place directly on a rug or carpet with long
strands.
 Do not install in a closed room with poor
ventilation and circulation.
 If you use the machine in a small room for a long
time, please make sure that you ventilate the
room.
 Install away from strong magnetic fields and
sources of noise.
 Install away from monitors or TVs.
 When moving the machine, hold it on both sides,
and move it by slightly letting the back of it fall.
- 13 -
Overview of Machine
10°C~32°C
20%~80% RH(relative
humidity)

25°C
WARNING
CAUTION
1