Table of Contents
Advertisement
Error
code
614
%COLOR% Toner Cartridge Region
615
Mismatch: %ERRCODE%
616
617
Please see Help for details.
620
%COLOR% Toner Cartridge Region
621
Mismatch: %ERRCODE%
622
623
Please see Help for details.
Non Genuine %COLOR% Toner cartridge.
Please see Help for details.
Image Drum Unit Near Life.
Please see Help for details.
Fuser Unit Near Life.
Please see Help for details.
Belt Unit Near Life.
Please see Help for details.
354
Please change Fuser Unit. : 354
Please see Help for details.
Please change Fuser Unit.
Please see Help for details.
355
Please change Belt Unit. : 355
Please see Help for details.
Message
<Status>
key
Blinks
The toner cartridge is not a genuine Oki toner
cartridge and may damage your machine.
Use a genuine Oki toner cartridge for the
indicated color.
614 : Y
615 : M
616 : C
617 : K
Blinks
The toner cartridge is not a genuine Oki toner
cartridge and may damage your machine.
Use a genuine Oki toner cartridge for the
indicated color.
620 : Y
621 : M
622 : C
623 : K
Lights up The toner cartridge is not a genuine Oki toner
cartridge and may damage your machine.
Use a genuine Oki toner cartridge for the
indicated color.
Lights
The image drum unit is near the end of its life.
up*
Prepare a replacement image drum unit.
* If the <SETTING> key >[Admin Setup] > [Device Man-
agement] > [System setup] > [Status in Near life] is set
to [Enable] and [Near life LED] is set to [Disable], the
<STATUS> key does not turn on.
If [Status in Near life] is set to [Disable], this message is
not displayed and the <STATUS> key does not turn on.
Lights
The fuser unit is near the end of its life.
up*
Prepare a replacement fuser unit.
* If the <SETTING> key > [Admin Setup] > [Device Man-
agement] > [System setup] > [Status in Near life] is set
to [Enable] and [Near life LED] is set to [Disable], the
<STATUS> key does not turn on.
If [Status in Near life] is set to [Disable], this message is
not displayed and the <STATUS> key does not turn on.
Lights
The belt unit is near the end of its life.
up*
Prepare a replacement belt unit.
* If the <SETTING> key > [Admin Setup] > [Device Man-
agement] > [System setup] > [Status in Near life] is set
to [Enable] and [Near life LED] is set to [Disable], the
<STATUS> key does not turn on.
If [Status in Near life] is set to [Disable], this message is
not displayed and the <STATUS> key does not turn on.
Blinks
The fuser unit is at the end of its life. This error
indicates the end of its life according to the
counter, and the current job is stopped.
Replace it with a new fuser unit.
Lights up The fuser unit is at the end of its life.
Replace it with a new fuser unit.
Blinks
The belt unit is at the end of its life. This error
indicates the end of its life according to the
counter, and the current job is stopped.
Replace it with a new belt unit.
- 129 -
Error Messages
Cause/Remedy
7
Advertisement
Table of Contents
