Certifi Cation; Ce Marking; Ul Marking; Csa Marking - KEB combivert R6-S Instruction Manual

Appendix
A.1 Certifi cation
A.1.1 CE Marking
CE marked power supply-/regenerative units were developed and manufactured
to comply with the regulations of the Low-Voltage Directive 2006/95/EC.
The described units must not be started until it is determined that the installation complies with the
Machine directive (2006/42/EC) as well as the EMC-directive (2004/108/EC)(note EN 60204).
The power supply-/regenerative units meet the requirements of the Low-Voltage Directive 2006/95/
EC. The harmonized standards of the series EN 61800-5-1 in connection with EN 60439-1 and EN
60146 were used.
This is a product of limited availability in accordance with IEC 61800-3. This product may cause
radio interference in residential areas. In this case the operator may need to take corresponding
measures.
A.1.2 UL Marking
Acceptance according to UL is marked on KEB power supply and regenerative
units with the adjacent logo on the name plate.
This device has been investigated by UL according to United States Standard UL508C, Third Edi-
tion (Power Conversion Equipment) and to the Canadian Standard CSA C22.2 No.14-2010, 11th
Edition (Industrial Control Equipment).
A.1.3 CSA Marking
Acceptance according to CSA is marked on KEB power supply and regenerative
units with the adjacent logo on the name plate.
US
C
This device has been investigated by CSA according to the Canadian Standard CSA C22.2 No.14-
2010, 11th Edition (Industrial Control Equipment).
US - 40