Using The Control Dial - Canon EOS C200 Instruction Manual

ISO Speed/Gain

Using the Control Dial

You can adjust the ISO speed or gain value using the control dial
on the camera or that on the camera grip
You will need to set in advance the function of one of the control
70
dials to [ISO/Gain]. You can select the function assigned to each
control dial independently.
1
Supplied accessory for the C200; optional accessory for the C200B.
Assigning ISO Speed/Gain Control to a Control Dial
1 Open the [Camera Ctrl Dial] (control dial on the camera) or
[Camera Grip Ctrl Dial] (control dial on the camera grip)
submenu.
> [B $ System Setup] > [Camera Ctrl Dial] or
[Camera Grip Ctrl Dial]
2 Select [ISO/Gain] and then press the joystick.
Changing the ISO Speed or Gain Value
To select whether to change the ISO speed or the gain, perform the previous procedure (A 69). Turn the control
dial assigned to [ISO/Gain] to set the desired ISO speed or gain value.
NOTES NOTES
• When high ISO speeds or gain levels are set, the picture may flicker slightly.
• When high ISO speeds or gain levels are set, bright red, green or blue dots may appear on the screen. In such
case, use a faster shutter speed (A 67) or select a lower ISO speed or gain value.
• When the ISO speed or gain level is changed, some noise may appear momentarily on the screen. Do not
adjust the ISO speed/gain level while recording.
• You can use the
setting to change the direction of the adjustment when you turn the control dial on the camera or on the
camera grip, respectively.
• When an optional RC-V100 Remote Controller is connected to the camera, you can adjust the ISO speed or
gain value with the remote controller's ISO/GAIN Í/Î buttons.
1
.
> [B $ System Setup] > [Camera Ctrl Dial Dir.] or [Camera Grip Ctrl Dial Dir.]
Control dial