Table of Contents
Advertisement
Options
Applied LUT
[LUT: BT.709]
1
[LUT: HDR Assist. (1600%)]
,
1
[LUT: HDR Assist. (400%)]
2
[LUT: ACESproxy]
[LUT: Off]
1
Available only for output from the VIDEO terminal and the camera's viewfinder (
2
! Custom Picture/HDR
Only when [
NOTES
• When you apply the [LUT: ACESproxy] LUT to the SDI terminal, it will output ACESproxy video data. Using a
compatible monitor, you can perform on-set color grading and check the image after color correction as you
continue shooting.
• If you set an assignable button to [LUT] (A 119), you can press the button to turn on and off the LUTs applied
to all output terminals/screens at once.
• If you change the
deactivated and all the terminals' output settings will be reset to [LUT: Off].
Superimposing Onscreen Displays on Screens/Video Outputs
You can choose to superimpose onscreen displays on the video output from the SDI terminal or HDMI OUT
terminal. Doing so will display the onscreen displays on an external monitor. This setting will not affect your
recordings.
Operating modes:
1 Open the [OSD Output] submenu.
> [¢ % Monitoring Setup]
1
l
Appears on the previous page in the menu.
2 Select [On] and then press the joystick.
mode, T appears on the right of the screen (only if [¢ % Monitoring Setup] > [Custom
• In
Display 2] > [OSD Output] is set to [On]). In
playback screen.
NOTES
• When the video output from the HDMI OUT terminal is 4K (3840x2160) recorded at 59.94P or 50.00P, the
onscreen displays will be superimposed on the video.
• If you set an assignable button to [OSD Output] (A 119), you can press the button to turn on and off the
superimposing of onscreen displays on video output.
Output Settings with LUT applied
Gamma curve
Color space
Wide DR
BT.709
Original gamma
BT.709
curve
ACESproxy
ACESproxy
–
–
>
]
[Preset] is set to [Canon Log 3]. Available only for SDI output.
> [
! Custom Picture/HDR] > [Preset] or [Gamma] setting, the LUT will be
1
> [OSD Output]
Connecting to an External Monitor or Recorder
Description
LUT for viewing on the screen or external monitors compatible with BT.709
specifications.
LUT for viewing HDR (high dynamic range) images on monitoring devices
connected to the VIDEO terminal. The LUT follows the BT.2100 transfer
function to convert a brightness range of 1600% or 400% respectively into
output the same as video displayed on an HDR-compatible display.
LUT for viewing on external monitors compatible with the ACESproxy
standard established by ACES (Academy Color Encoding System). The signal
output will use full range coding.
No LUT applied.
k
only).
mode, the icon appears at the top of the screen in the
145
Advertisement
Table of Contents
