Changing Main Camera Functions With The Func Button; Using The Direct Setting Mode - Canon EOS C200 Instruction Manual

Changing Main Camera Functions with the FUNC Button

Changing Main Camera Functions with the FUNC Button
You can adjust three main camera functions—shutter speed, white balance and ISO speed/gain—using the
FUNC button (direct setting mode).
66
This section will explain the basic operation of the direct setting mode. For specific details about the functions
refer to the each function's section: shutter speed (A 67), white balance (A 77), ISO speed/gain (A 69).
Operating modes:

Using the Direct Setting Mode

1 Press the FUNC button.
• The onscreen display of the function to be
adjusted will be highlighted in orange.
• Press the FUNC button repeatedly or push the
joystick left/right to select the function you wish
to adjust.
2 Push the joystick up/down to select the
desired value (ISO speed, gain, shutter speed)
or desired white balance mode and then press
the joystick.
• The selected value will be set and the camera
will exit the direct setting mode.
• The onscreen display of the selected function will return to normal.
• Depending on the function selected, additional adjustment may be possible or necessary before pressing
the joystick.
NOTES NOTES
• The camera will automatically end the direct setting mode in the following cases.
- If no operation was performed for more than 6 seconds.
- If the menu or a status screen was opened.