Table of Contents
Advertisement
Connecting to a Wired (Ethernet) Network
Connecting to a Wired (Ethernet) Network
Connect the camera to a router or other device connected to a wired (Ethernet) network using a commercially
available Ethernet cable. Use Category 5e, shielded twisted pair (STP) Ethernet cables compatible with Gigabit
156
Ethernet (1000BASE-T) and with good shielding capability.
Ethernet port on a
network device
1 Connect a commercially available Ethernet cable to t
Ethernet port on a network device.
2 Open the connection method selection submenu.
> [
! Network Settings] > [Connection Settings] > select the desired configuration number* >
[Edit]
* You can save up to 4 network configuration profiles in the camera. Push the joystick up/down to select the configuration number.
3 Select [Ethernet] and then press the joystick.
4 Continue with the procedure to configure the IP address assignment (A 151).
Ethernet cable
(commercially available)
(Ethernet) access indicator
he
(Eth
ernet) terminal on the camera and an
Advertisement
Table of Contents
