Canon EOS C200 Instruction Manual page 139

6
Video Output Configuration
The video signal output from the SDI terminal and HDMI
configuration and on various menu settings.
Recording Video Signal Configuration and Video Output Configuration by Terminal
Refer to the following table for the video output configuration from each terminal, depending on the recording
video configuration used.
Operating modes:
Recording video configuration
1
Video format Frame rate
59.94P
50.00P
29.97P
RAW
25.00P
24.00P
23.98P
59.94P
50.00P
29.97P
MP4
25.00P
24.00P
23.98P
1 3 !
> [ Recording/Media Setup] > [Main Rec Format].
2
The frame rate of the video output will be the same as that used for recording (except during slow motion recording).
3
You can choose to superimpose onscreen displays on the video output from the SDI terminal or HDMI OUT terminal (A 145).
(This is not available for the HDMI OUT terminal when outputting 4K (3840x2160) video at 59.94P or 50.00P.)
You can apply peaking (A 83) and magnification (A 83) to the video output from the SDI/HDMI OUT terminal.
4 B "
System Setup] > [SDI Output] and [HDMI Max Res.].
[
5
Video with a resolution of 2048x1080 will be displayed letterboxed.
6
Output will be YCbCr 4:2:0 8 bit when the frame rate is 59.94P or 50.00P.
7
Output will be YCbCr 4:2:2 8 bit during slow motion recording mode.
8
Except during slow motion recording mode.
2
Resolution
2048x1080 /
1920x1080
2048x1080
4096x2160
YCbCr 4:2:2 10 bit
3840x2160
1920x1080
External Connections
TM
OUT terminal, depends on the clip's video
Video output configuration
3
SDI terminal
4
SDI output
1920x1080
5
1920x1080
YCbCr 4:2:2 10 bit
1920x1080
7
YCbCr 4:2:2 10 bit
3
HDMI OUT terminal
4
Maximum resolution
3840x2160 1920x1080
5
1920x1080 1920x1080
YCbCr 4:2:2 10 bit YCbCr 4:2:2 10 bit
1920x1080
3840x2160
YCbCr 4:2:2 10 bit
6
YCbCr 4:2:2 8 bit
720x480
(59.94P only)
1920x1080
720x576
7
YCbCr 4:2:2 10 bit
(50.00P only)
139
5
3
7
,
8
,
8