Table of Contents
Advertisement
! Custom Picture/HDR
[
Submenu levels / Menu items
[Black]
[Master Pedestal]
[Master Black Red],
[Master Black Green],
[Master Black Blue]
[Black Gamma]
[Level]
[Range], [Point]
[Point]
[Level]
[Range]
Input
[Low Key Satur.]
[Activate]
[Level]
[Knee]
[Activate]
>
]
[Other Settings] Submenu (Detailed Settings)
–50 to 50 (±0)
Increases or decreases the black level. Higher settings will make dark areas brighter but decrease
contrast. When [Gamma] is set to one of the Canon Log settings, this setting has no effect on the
picture.
–50 to 50 (±0)
These settings correct the color cast in blacks. When [Gamma] is set to one of the Canon Log
settings, these settings have no effect on the picture.
–50 to 50 (±0)
–20 to 50 (±0)
These settings control the lower part of the gamma curve (dark areas of the image). When [Gamma]
is set to one of the Canon Log settings or [Wide DR], these settings are not available.
[Level]: Raises or lowers the lower part of the gamma curve.
[Range]: Selects the adjustment range from the selected [Point].
[Point]: Determines the shape of the lower part of the gamma curve.
[On], [Off]
Set this setting to [On] to enable the adjustment of color saturation in dark areas with the [Level]
setting.
–50 to 50 (±0)
Specifies how saturated colors are in dark areas.
[On], [Off]
Set this setting to [On] to enable the adjustment of the knee point with the following settings. When
[Gamma] is set to one of the Canon Log settings or [Wide DR], the [Knee] settings are not available.
Options / Additional information
Custom Picture Settings
127
Advertisement
Table of Contents
